Showing posts with label electrical. Show all posts
Showing posts with label electrical. Show all posts

Sunday, 5 March 2017

How to Install fog lamp in your Royal Enfield

Now a days fog lamps are gaining importance in two wheeler. Many types of LED fog lamps are available in the market with reasonable price and it's very useful to ride in fogy and dust covered areas.



The main difference between normal head lights and fog lights are spreading of its beam. Fog lights are spreads wider and does not travel longer as head lamps. Head lamp beam travels longer then fog lamps. So in foggy conditions fog lamps are very useful with wide spread of beam in short distance in lower speed. 

Basic things to know before install the fog lamp
Before Install the fog lamp in your RE, first know the basic things. Your motorcycle battery is important part of the lighting, don't fix the extra loads to your poor battery it will start to give trouble. So check your battery condition and capacity. All older model 350 & 500 are equipped with 12Volt 14Ah Negative earth system. (Only self start models). Newer 350cc Electric start and Himalayan models uses 12Volt 8Ah Negative earth system, all 500cc uses 12Volt 14Ah Negative earth system. GT535 use 12Volt 8Ah.

 Choosing your lamps
 There are many types of fog LED Fog lamps available in the market as well as online. chose a good quality lamps and keep in mind that power does not more then 10 to 15Wastts, other wise it will drain the battery. Buy a good quality power cut off switch, fuse & holder, relay and wiring materials. 

LED fog lamps

Fuse holder and fuse to protect your wiring circuit (10Ah is enough)
Switch to control the power light

Relay to control the switching circuit (10Ah is enough)

Let us fix

Wiring Diagram for Fog/Auxiliary lights

 First choose proper location to to fix the lamps, do not fix too high on motorcycle it blinds the on coming traffic. Leg guard level is good. fix it with proper fasteners.

To do this work first remove the seat and fuel tank in all model, by doing this you will get plenty of space to work. In standard and classic models battery located at LH side of the vehicle, separate battery box is provided. In Thunderbird and GT its located on left side cover and In Himalayan under the rider's seat.

In above circuit check the battery its Negative terminal was connected to the frame. In Positive terminal there was to wires connected on is main wiring diagram, don't tamper it, just connect a new wire to the positive terminal and fix fuse holder into it (Please take out the fuse). 

After the fixing the fuse take the wire under the fuel tank till till fog lamp by using god quality sleeves and proper wiring ties. Connect the Positive wire to the relay Input. In relay there is fore terminal is there, out of it two terminals are used for activate the relay other two are Input and out put of the relay. (Load). So here you have to connect the battery wire to the relay's Load Input and take  another connection from the relays out put terminal and connect it  to the  fog lamp terminal. Connect other terminal of the fog lamp to the frame. Now fog lamp wiring circuit is completed.

Connecting the Power switch

Fix the fog lamp switch in handlebar in convenient location, there are two terminal in the switch connect one terminal to the Relay's power terminal, there are two power terminals in the relay another terminal has  to be connected to the frame (Earth).

Switch on the Ignition of motorcycle find the live wire of front brake or clutch switch and connect the power switch wire to it. Insert the fuse on holder, and check the lighting operation.

Working of Relay  

Relay is a simple magnetic switch it consists for terminals, out of it two terminals are connected to the battery via Power switch, another two terminals are load input and out put, which there is no electricity in the primary coil terminals load terminals are in disconnected position. As soon as switch on the power positive current passes through the  relay's coil via and build magnetic fields and pulls the contact placed top of it against the tension of a small spring. As soon as it pulls the contact the input current which was connected to the battery positive via fuse passes through the out put terminal and power goes to the fog lamps.

Joints and connectors

Proper knots

Connectors
Connecting Lugs


Notes : When you install any electrical items to your motorcycle, check the compatibility, use proper tools, connectors, seal the joints with insulator to avoid damages.  

Sunday, 16 January 2011

Strange Problem In my TBTS

One month back my TBTS showed a strange problem, after riding 25kms with head lamp on, and slow down the vehicle with both clutch and brakes are applied headlamp goes little dim but strange thing was engine was running in idling rpm but RPM needle goes down to zero, especially it happens when I try to descending in mud road, if I stop the vehicle completely and checked the needle it was still in zero it goes up only by switch off the head lamp or by revaluating engine hardly, starter motor also does not crank smoothly. So, I checked the battery voltage, it showed 11.60V after starting the vehicle it goes to 11.9V and if I race the engine to 3000 RPM then it will reach up to 12.6V maximum, and if head lamp on then it was 11.8V to 12.4V. According to the Royal Enfield it must be between 12.2 to 13.5 @3000 RPM. So, I think that it was battery problem and removed the battery to inspect the electrolyte and found it was O.K. same time I observed that sometimes the rear brake switch getting jammed if brake applied hardly. It was also corrected after riding two days that problem automatically gone today I checked the battery voltage aging it shows 12.60 V while engine off, 12.8V and 13.5V at 1000 & 3000 RPM respectively, either in head lamp on or off.

My problem is left, but I could not find out the reason, I have only two things to suspect one was rear brake switch and another thing I observed while removing the battery the terminal bolts are loose.